How to clean your Mimaki JV3 printhead when you replace it

How to clean your Mimaki JV3 printhead when you replace it

[Preparation]

• Replacement parts : S-print head assy (M004905)

• Head cleaning tool (M005027)

• Cleaning fluid for S-head replacement (M005026)

• Waste (non-woven paper, etc.)

[Washing procedure]

1) Remove the damper assy.

2) Fill the syringe with 6 to 8 cc cleaning liquid for S head replacement.

3) Connect the S-damper assy to the syringe.

4) Insert the dumper into each of two damper insertion projections of the head for replacement.

5) Inpour cleaning liquid for replacement in step of about 3 to 4 cc, taking about 30 seconds.

(Inpouring liquid rapidly may damage the head. Inpour it slowly.)

Use cotton waste to receive liquid flowing from the nozzle surface.

• Do not bring cotton waste, etc. into contact with the nozzle surface. Never rub the

nozzle surface because doing so may cause nozzle discharge failure.

www.dgpartsmall.com